CCTV DN-58216 Technical Information download pdf (Page 25)

Main 25

[Area Clear]

Delete Detection Area for selected camera. To manually delete an area, simply drag the detection area

outside the channel screen.

[Area Draw]

Assign an entire channel view as a detection area.

[Camera Adjustment]

Adjust brightness, hue and contrast for each camera. Caution: Adjusting these options will affect the

recorded data.

[Color]

If the camera is black and white, click [Color] to change the channel into Black and White. The default is

set to Color for all channels.

[Default]

Set values in (10) and (11) back to default.

[Set quad rotation time]

Select the rotation time for Channel Rotation.

[Full screen when motion]

The channels of the cameras specified in this box will change to full screen if they detect motion. If you

wish to select multiple cameras, type the camera numbers in the box, separating them by a comma.

[Full Screen when sensor]

The channels of the cameras specified in this box will change to full screen if a sensor is activated. If you

wish to select multiple cameras, type the camera numbers in the box, separating them by a comma.

[Delay Time (sec)]

Delay Time works in conjunction with [Full screen when motion], and will freeze the channel if motion

is detected on cameras with [Full screen when motion] enabled. To enable Delay Time, select the

number of seconds from the scroll list.

[No full screen]

Cancels options set on [Full screen when motion] and [Delay time].

[Color of motion area]

When a camera detects motion its channel will highlight the Detection Areas by the color you select

here (Red or Green).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 84 85

No comments

CCTV DN-58216 Technical Information Page 25