CCTV EASY SERIES H.264 Technical Information download pdf (Page 27)

English

Advanced Conguration

Advanced Conguration

If you’re reading this page, it means that either:

• You’ve got the DVR setup, but it’s standard recording

program isn’t for you. Fair enough - we cater to all

requirements here.

• You’re interested in what other options and

capabilities the DVR has. Excellent - the answer is “a lot”.

• Everything works except just that one thing that isn’t

right but you don’t know where the option is. Darn.

We’ll try and get you xed up by the end of this page.

There are some sections of Advanced Conguration that we

think are of benet for most DVR owners to know about - in

particular, the Alarm settings and the Email Conguration of

the DVR.

By Default...

• The DVR has motion recording enabled on every channel,

congured to operate at an average level of sensitivity.

• To be a little more likely to record an border-line motion

event than not (we think it’s better to get a false trigger

than miss an event).

• To record video each time it detects a motion event, but

not notify you via email (all events will be listed in the log).

To alter the DVR’s default behavior, you’ll need to change

some of the advanced settings.

You can do this by using the MyDVR PC software (as detailed

earlier, see “MyDVR: Conguration Overview” on page 20, or

you can use the DVR’s built-in interface.

Quick Reference

Some of the more common reasons to have a look in the

Advanced Conguration include:

Altering the Recording Schedule

The recording schedule is one of the most important things to

get right when conguring the DVR. More information about

the schedule can be found at:

• “Recording: Schedule” on page 32

Conguring the Auto-Email Functions

If you want the DVR to notify you via email when it detects a

motion event, then you’ll need to congure:

• “Network: Advanced: Email Settings” on page 41

• “Alarm: Motion Detection - Action” on page 45

• “Alarm: Motion Detection Notes” on page 44

Altering the Motion Detection Settings

If you want to change the way the DVR handles motion, then

you’ll need to look at:

• “Alarm: Motion” on page 42

• “Alarm: Motion Detection Conguration” on page 43

You want to connect a PTZ Device

If you got your camera as part of a kit with the DVR, then

there shouldn’t be much conguration required. Follow the

instructions in your Swann PTZ Camera manual.

If the camera did not come with the DVR, then you’ll probably

need to change the PTZ Conguration page. See:

• “Device: PTZ” on page 48

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comments to this Manuals

No comments

CCTV EASY SERIES H.264 Technical Information Page 27

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) CCTV EASY SERIES H.264