CCTV Qvis DVR series User Manual download pdf (Page 47)

STEP 4:

Input the IP address in Internet Explorer, and add port number of the Embedded DVR,

for example: 155.157.12.227:81. If you want to enter via the Client Software then you

will need to use the TCP port offered by the outer net.

NOTE: if there are a few embedded DVRs that need to set the UPnP function,

in order to avoid IP conflict, set the ports of embedded DVRs to different ports

numbers. Otherwise, it will choose the embedded DVR port set preceded as the

first choice.

4.2.2 Manual port mapping

The first step

Connect the Embedded DVR to the Router and set the static IP.

The second step

menu. Then get to port, set the IP distributed by the Embedded DVR, and set port

mapping, add HTTP and TCP port into mapping list.

The default access ports of the Embedded DVR include HTTP port 80 and TCP port

8000. If the ports are occupied by other devices, please modify the default port of the

embedded DVR into the other vacant ports.

The third step

Input the public net IP address in Internet Explorer, and add the port number of the

embedded DVR that you want to access after the IP, for example:

http://155.157.12.227:81. If you want to access via the Client Software, you can use

the outer net TCP port directly to do so.

NOTICE: for detail configuration setting, please refer to the user manual of

Router.

4.3 NTP function

Enable NTP function; synchronise the time with both the DVR and GPS clock server, to

ensure the accuracy of device time.

4.3.1 Internet configuration

Go to the 【CONFIGURATION】→【NETWORK】, choose 【Advanced】, and then

choose 【NTP】to set.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54 55

No comments

CCTV Qvis DVR series User Manual Page 47