CCTV Qvis DVR series User Manual download pdf (Page 23)

z TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

Max connection: system support maximal 10 users. 0 means there is no connection limit.

Transfer mode: Here you can select the priority between fluency/video qualities.

Network download: System can process the downloaded data first if you enable this function.

Advanced setting: Please refer to the user’s manual included in the resource CD for detail

information.

After completing all the setups please click save button, syste

m goes back to the previous menu.

Figure 2-13

2.5 Pan/Tilt/Zoom

Please note:

Slight difference may be found in the user’s interface, due to various protocols.

Please make sure the speed domes A/B cables are properly connected to the A/B ports of

DVR.

You have properly set PTZ information.

Please switch camera monitor channel to current window.

2.5.1 PTZ Setup

The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 2-14.

Protocol: Select corresponding PTZ protocol such as PELCOD.

Address: Input corresponding PTZ address.

Baud rate: Select baud rate.

Data bit: Select data bit. Default value is 8.

Stop bit: Select stop bit. Default value is 1.

Parity: There are three choices: none/odd/even. Default value is none.

Figure 2-14

www.cctvireland.ie 1890 866 900

1 2 ... 18 19 20 21 22 23 24 25 26 27

No comments

CCTV Qvis DVR series User Manual Page 23