CCTV Qvis DVR series User Manual download pdf (Page 35)

Figure 4-11

4.4 Schedule

After system booted up, it is in default 24-hour regular mode. You can set record type and

time in schedule interface.

4.4.1 Schedule Menu

In the main menu, from setting to schedule, you can go to schedule menu. See Figure 4-12.

 Channel: Please select the channel number first. You can select “all” if you want to set for

the whole channels.

 Week day: There are eight options: ranges from Saturday to Sunday and all.

 Pre-record: System can pre-record the video before the event occurs into the file. The value

ranges from 1 to 30 seconds depending on the bit stream.

 Redundancy: Please note redundancy function does not applies to 1U series since there is

only one HDD,

 Snapshot: You can enable this function to snapshoot image when alarm occurs.

 Record types: There are three types: regular, motion detection (MD) and Alarm.

Please highlight icon

to select the corresponding function. After completing all the setups

please click save button, system goes back to the previous menu.

At the bottom of the menu, there are color bars for your reference. Green color stands for

regular recording, yellow color stands for motion detection and red color stands for alarm

recording.

Figure 4-12

4.4.1.1 Quick Setup

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 125 126

No comments

CCTV Qvis DVR series User Manual Page 35