CCTV DN-58216 Technical Information download pdf (Page 22)

Manual22

Motion Detection

3.7

[Camera]

Select the camera you wish to setup. The

description below is related to the camera

you selected here

[Detection Area]

To enable cameras to record automatically

by motion detection, you must select the

detection areas. To select detection area,

place the mouse cursor over the channel

screen and drag the cursor in any direction

you wish. You can assign up to 5 separate

areas for each camera.

[Sensitivity]

Change sensitivity of motion detection.

Default value is set to 15 and it is the

recommended value.

[Alarm]

If the box is checked, the internal speaker will

beep when the camera detects motion.

The speaker however will not beep if the

camera is set to Continuous Recording mode

in Scheduled Setup (see page page 27). The

speaker's activation time can be set by the

scroll lists.

[Control]

When the camera detects motion, the

connected control will activate for the

designated time.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 84 85

No comments

CCTV DN-58216 Technical Information Page 22